Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Geometry from 3D Scanner

Posted 2015年6月15日 GMT-4 11:18 Geometry Version 4.4 0 Replies

Bartu Avci
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I am working on a model where I need to deal with a fairly complex geometry. I am thinking of getting the geometry from a 3D scan and importing it to COMSOL.

In my version of COMSOL under "Import" tab, there are only the following options for "Geometry import":
- COMSOL multiphysics file
- STL/VRML file
- ECAD file (GDS/NETEX-G)
- ECAD file (ODB++)

I will not perform any geometry changes with COMSOL (such as parameter sweep for thickness); but I should be able to select edges/boundaries to define some conditions.

Would using a 3D scanner be a sound option in that case?

Thank you,
Bartu

0 Replies Last Post 2015年6月15日 GMT-4 11:18
COMSOL Moderator

Hello Bartu Avci

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content