Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Vibrating sphere in water

Posted 2015年7月8日 GMT-4 20:58 MEMS & Nanotechnology, Fluid & Heat, MEMS & Piezoelectric Devices, Computational Fluid Dynamics (CFD), Microfluidics, Installation & License Management, Mesh, Structural Mechanics Version 4.4 1 Reply

Montassar Aidi Sharif
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody
I am new user, I am trying to simulate Tank of water and inside the tank vibrating sphere , could anyone help me with that
Thanks
1 Reply Last Post 2015年7月9日 GMT-4 15:45
AC
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年7月9日 GMT-4 15:45
your question is too vague to offer any significant help. For instance what will drive the sphere, materials etc.

However, here are some general comments: build your geometry, run an eigen-frequency study, and drive the model at an eigen-frequency of interest to find displacement/energy etc.



your question is too vague to offer any significant help. For instance what will drive the sphere, materials etc. However, here are some general comments: build your geometry, run an eigen-frequency study, and drive the model at an eigen-frequency of interest to find displacement/energy etc.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content