Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Change boundary conditions during a heating process

Posted 2015年8月24日 GMT-4 03:51 Heat Transfer & Phase Change, Parameters, Variables, & Functions, Studies & Solvers Version 5.1 0 Replies

Howard Park
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

In an heating simulation, I would like to change a boundary condition during the simulation. I would to impose on this boundary:

1. a heating condition during 600 min
2. an tempering condition (no heating, but there is conduction in the material) every 20 min for 5 min.
So,
0-20 min: heating
20-25 min: tempering
25-40 min: heating
40-45 min: tempering
...

Is it possible? With the solver sequence? How to do it?
Thank you. Howard
0 Replies Last Post 2015年8月24日 GMT-4 03:51
COMSOL Moderator

Hello Howard Park

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content