Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Developing a 3D Undulating Geometric Surface Using Comsol Multiphysics
Posted 2015年10月9日 GMT-4 13:14 Version 5.1 3 Replies
Please login with a confirmed email address before reporting spam
I have been trying to develop a 3-dimensional undulating surface in the x-direction. Find attached a figure explaining my geometry. If someone have any idea on how to develop this geometry. I will be happy to know. The Geometry is a hemisphere with an undulating surface along the flat plane. Thank you.
Attachments:
3 Replies Last Post 2015年10月9日 GMT-4 15:53
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
You can use a Parametric Surface node for this purpose.
Best regards,
Jeff
Best regards,
Jeff
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
I try using the parametric surface. The parametric surface is not behaving like a solid so I can enforce a boundary condition over the surface. The hemisphere is a solid.
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Updated:
6 years ago
The idea is to use the parametric surface to partition a sphere into two chunks, one of which you then delete.
Best,
Jeff
Best,
Jeff