Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Physical significance and units of Cathode boundary condition in Primary current distribution calculations

Posted 2015年11月9日 GMT-5 13:40 Electrochemistry 3 Replies

Palli Srinivas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In the primary current distribution calculations, the Electrolyte-Electrode Boundary Interface boundary condition [Eq. surface integral of local current densities]is used at the cathode surface. What is the physical significance of this boundary condition? The units of this boundary condition are not consistent. Is the form of this boundary condition is correct or wrong? Please give me answers as soon as possible.
3 Replies Last Post 2015年11月10日 GMT-5 09:14
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年11月9日 GMT-5 14:43
You can control potential or current between the electrodes. Current boundary condition means that you define the current you are drawing out of the cell. Because the primary current distribution is about the the effect of the cell geometry, the local current density varies along the electrode, but the the total current is the one you define.

How do you mean the units are not consistent?

BR
Lasse
You can control potential or current between the electrodes. Current boundary condition means that you define the current you are drawing out of the cell. Because the primary current distribution is about the the effect of the cell geometry, the local current density varies along the electrode, but the the total current is the one you define. How do you mean the units are not consistent? BR Lasse
Palli Srinivas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年11月10日 GMT-5 08:33
Thank You very much Lasse Murtomäki for reply.

In reply, whatever you said is correct. But, the boundary condition equation is surface integral of n.il (where n is the normal vector, pointing out of the domain and il (A/m2) is the electrolyte current density vector) which gives us an applied average current density. The units of left side of the equation is not equal to the units of the right side of the equation i.e. (A/m2). Is this equation correct or any quantity in that equation is missed. Please clarify me.



Thank You very much Lasse Murtomäki for reply. In reply, whatever you said is correct. But, the boundary condition equation is surface integral of n.il (where n is the normal vector, pointing out of the domain and il (A/m2) is the electrolyte current density vector) which gives us an applied average current density. The units of left side of the equation is not equal to the units of the right side of the equation i.e. (A/m2). Is this equation correct or any quantity in that equation is missed. Please clarify me.
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年11月10日 GMT-5 09:14
OK, you are using the average current density BC in 2D; then it should be, indeed, A/m. This could be a bug. In a 3D model units are correct. Yet, I do not believe this has any significance.

BR
Lasse
OK, you are using the average current density BC in 2D; then it should be, indeed, A/m. This could be a bug. In a 3D model units are correct. Yet, I do not believe this has any significance. BR Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content