Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to connect FEM resistance model to the Electric Currents Interface?
Posted 2015年11月24日 GMT+8 14:44 Low-Frequency Electromagnetics 3 Replies
Please login with a confirmed email address before reporting spam
Thought about Termianl and External I vs. U but can't set the features correctly.
3 Replies Last Post 2015年11月24日 GMT+8 23:37
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Hi
Do you have a model you could send? it could be easier to directly have a look at your model
Dara
Do you have a model you could send? it could be easier to directly have a look at your model
Dara
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Thank you for your reply,Dara. The resistance is just a cylinder made of iron.
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
hello
maybe something like this (attached)
I think for this simple model you don't need the "cir" (electrical circuit). You just need to define a ground and an electric potential in the "ec".
hope it helps
Dara
maybe something like this (attached)
I think for this simple model you don't need the "cir" (electrical circuit). You just need to define a ground and an electric potential in the "ec".
hope it helps
Dara
Attachments: