Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
deformed geometry - interface velocity
Posted 2016年1月8日 GMT-5 09:54 Heat Transfer & Phase Change Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I have a problem (2d-axy) where an interface moves depending on thermal fluxes with a normal velocity of the mesh Vinter.
BUT I have also to impose a mesh velocity Vimposed along an axis on the same boundary.
I cannot find a solution to this problem.
The more accurate solution that I found for the moment is
Prescribed Mesh Velocity:
vr=Vinter*nr
vz=Vinter*nz-Vimposed
with weak constraints
The computation can't start
Some ideas?
Best regards
Julien
I have a problem (2d-axy) where an interface moves depending on thermal fluxes with a normal velocity of the mesh Vinter.
BUT I have also to impose a mesh velocity Vimposed along an axis on the same boundary.
I cannot find a solution to this problem.
The more accurate solution that I found for the moment is
Prescribed Mesh Velocity:
vr=Vinter*nr
vz=Vinter*nz-Vimposed
with weak constraints
The computation can't start
Some ideas?
Best regards
Julien
1 Reply Last Post 2016年1月8日 GMT-5 11:30
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
It seems that the problem comes from the axis of symetry in 2d axy and the weak constraint condition applied together.
Maybe there is a trick to avoid this problem?
Best regards
Julien
Maybe there is a trick to avoid this problem?
Best regards
Julien