Menu

论文和技术资料

快速搜索

技术资料
白皮书和应用说明

Simulation of a Heated Tool System for Jet Electrochemical Machining

M. Hackert[1], G. Meichsner[2], and A. Schubert[1][2]

[1]Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, Chemnitz, Germany
[2]Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany
发布日期 2009

Jet Electrochemical Machining (Jet-ECM) is an unconventional procedure using localized anodic dissolution for micromachining. An increasing of the electrolyte temperature will lead to an increase of the electrical conductivity of the electrolyte by about 30% and to a reduction of the dynamic viscosity of the electrolyte by about 25 %. Both will improve the process. Therefore a Jet-ECM tool system with integrated heating cartridge was developed at Chemnitz UT and COMSOL Multiphysics® was used to simulate the temperature distribution in the tool system for different heating powers. The results of the simulation will perspectively help to design the experimental investigations in high temperature Jet Electrochemical Machining

下载