了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究,或按照应用领域进行筛选。


查看 COMSOL 用户年会 2020 论文

Batteries, Fuel Cells, and Electrochemical Processesx

Numerical Evaluation of the Polarizability Tensors of Stem Cells with Realistic 3D Shapes

S. Baidya [1], A. M. Hassan [1], B. A. Pazmiño Betancourt [2], J. F. Douglas [2], E. J. Garboczi [3],
[1] Computer Science Electrical Engineering Department, University of Missouri - Kansas City, Kansas City, MO, USA
[2] Materials Science and Engineering Division, National Institute of Standards and Technology, Gaithersburg, MD, USA
[3] Applied Chemicals and Materials Division, National Institute of Standards and Technology, Gaithersburg, MD, USA

Most of the reported studies on the electrical characteristics of biological cells assume that they have ... 扩展阅读

Fast Charging Strategy Optimization based on Electrochemical Model and Dynamic Programming for a Lithium-ion Battery Cell

M. Xu [1] , X. Wang [1]
[1]Department of Mechanical Engineering, Oakland University, Rochester, MI, USA

Fast charging of lithium-ion batteries is critical to commercial application of electrical vehicles (EV). ... 扩展阅读

Design of an Electro-Osmotic Microfluidic Mixer

T. Eppes [1], I. Milanovic [1], S. Keilich [1],
[1] University of Hartford, West Hartford, CT, USA

This paper explores the performance of a microfluidic mixer that uses a sinusoidal electric field to ... 扩展阅读

Simulation and Design of Lithium Ion Battery Packs for the Altitude Conditions in Northern Chile

A. Mallco Carpio [1], M. Cortes Carmona [1],
[1] University of Antofagasta, Antofagasta Energy Center, Antofagasta, Chile

One of the most noticeable effects in loss of performance and capacity of thermal systems is produced by ... 扩展阅读

Uncertainty Assessment and Sensitivity Analysis of Heat Generation within a Lithium-Ion Battery

G. Liebig [1], G. Gupta [1], K. Derendorf [1], C. Agert [1],
[1] DLR Institute of Networked Energy Systems, Oldenburg, Germany

Dedicated work in modeling, simulation and design optimization of Lithium-ion Battery (LIBs) was done in the ... 扩展阅读

Modeling and Simulation of Redox Titration of Metal Oxides at Porous Microelectrodes

L. Balboa [1], M. Hänsch [1] , J. Behnken [1], G. Wittstock [1],
[1] Institute of Chemistry, Carl von Ossietzky University of Oldenburg, Oldenburg, Germany

In the past two decades, highly porous nanostructured materials have been investigated and used for a large ... 扩展阅读

2-D Modeling of CO2 Electrolysis Using Gas Diffusion Electrode Operate at Neutral pH and Mild Conditions

A. Monteverde Videla[1], N. Vasile[1], G. Saracco[1]
[1] Istituto Italiano di Tecnologia, Centre for Sustainable Future Technologies, Turin, Italy

CO2 capture and further conversion into valuable products can be a promising solution against global warming. ... 扩展阅读

Implementation of an Active Fluid Cooling Design in a 48 V High-Power Battery Module

Z. Wu [1], A. Stawarski [2], H. Kemper [2],
[1] Energy Storage Systems, FH Aachen - University of Applied Sciences, Aachen, Germany; RWTH Aachen University, Aachen, Germany
[2] Energy Storage Systems, FH Aachen - University of Applied Sciences, Aachen, Germany

Individual batteries have their own operational temperature ranges, which shall be respected to avoid both ... 扩展阅读

Copper Electrochemical Polishing Optimisation

A. Pérez Rodríguez [1], L. Marques Antunes Ferreira [1],
[1] CERN, Geneva, Switzerland

A new electrochemical polishing facility will be built at CERN to process copper radiofrequency structures ... 扩展阅读

A Computational Study of Stoichiometry Sensitivity of a PEM Fuel Cell with Multi-Parallel Flow Channels

M. A. Rahman [1], J. M. Mora [2], P. A. Chuang [1],
[1] School of Engineering, University of California, Merced, CA, USA
[2] University of the Philippines - Diliman, Quezon City, Philippines

Flow channel design in a PEM fuel cell plays a critical role for uniformly distributing reactants to the ... 扩展阅读