科技论文和演示页面包括了 COMSOL 全球用户年会上所有的用户演示文稿。这些演示文稿介绍了 COMSOL 用户是如何使用 COMSOL Multiphysics 进行创新性研究和产品设计,研究主题涵盖了包括电气、机械、流体和化工等范围广泛的行业和应用领域。您可以使用“快速搜索”来查找与您研究领域相关的演示文稿。
COMSOL-News-Magazine-2017
COMSOL-News-Magazine-2017-Special-edition-acoustics
COMSOL-News-Magazine-2016

Optimization of an Electrochemistry System

D. Mi [1],
[1] KEISOKU Engineering System Co., Ltd., Chiyoda-ku, Tokyo, Japan

Optimization of a typical electrochemical system with insulating shields is considered in this work, which objective is to reduce the current peak due ...

电极压缩程度对钒液流电池性能的影响

王琼 [1], 屈治国 [1],
[1] 西安交通大学,西安,中国

引言 钒液流电池储能技术作为高效电化学储能技术之一,可应用于新能源储能,电网削峰填谷、调频调幅、应急电源等。钒液流电池储能技术具有独立的的额定功率和额定能量,高输出功率,低成本等特点[1]。 COMSOL Multiphysics® 的使用 本文采用分区建模,模型耦合的方式进行模拟。 ...

Simulation of a Heated Tool System for Jet Electrochemical Machining

M. Hackert[1], G. Meichsner[2], and A. Schubert[1][2]

[1]Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, Chemnitz, Germany
[2]Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany

Jet Electrochemical Machining (Jet-ECM) is an unconventional procedure using localized anodic dissolution for micromachining. An increasing of the ...

Optimizing Fuel Cell Design with COMSOL Multiphysics

Chin-Hsien Cheng[1]
[1]Renewable Energy RD Center, Chung-Hsin Electric & Machinery, Taiwan

Proton exchange membrane fuel cells (PEMFCs) were investigated using COMSOL Multiphysics with the AC/DC Module and Chemical Engineering Module. ...

Modeling Migration-Diffusion-Reaction Processes in an Idealized Lithium-Sulfur Cell

G. Minton [1], R. Purkayastha [1], S. Walus [1], M. Marinescu [2], T. Zhang [2], G. Offer [2],
[1] Oxis Energy Ltd, Oxford, United Kingdom
[2] Imperial College London, London, United Kingdom

During the basic operation of a lithium-sulfur (Li-S) cell, sulfur molecules are required to undergo a complex mix of electrochemical and chemical ...

Investigation of Performance of SOFC in Hydrocarbon Fuel

S. T. Aruna [1], S. Senthil[1], S. Chauhan [1], B. Shriprakash [1],
[1] CSIR-National Aerospace Laboratories, Bangalore, Karnataka, India.

SOFC is a high temperature electrochemical device known for its fuel flexibility. Apart from using pure hydrogen, it can utilize CO (carbon monoxide), ...

An Agglomerate Model for the Rationalisation of MCFC Cathode Degradation

B. Bozzini[1], S. Maci[1], I. Sgura[2], R. Lo Presti[3], and E. Simonetti[3]
[1]Dipartimento di Ingegneria dell’Innovazione, Università del Salento, Lecce, Italy
[2]Dipartimento di Matematica, Università del Salento, Lecce, Italy
[3]ENEA Casaccia, Dipartimento TER, Centro Ricerche Casaccia, S. Maria di Galeria, Roma, Italy

This paper describes the numerical modeling of a key material-stability issue within the realm of Molten Carbonate Fuel Cells (MCFC). The model ...

Two-dimensional Model of a Lithium Iron-Phosphate Single Particle

M. Cugnet [1][2],
[1] Université Grenoble Alpes INES, Le Bourget du Lac, France
[2] CEA, LITEN, Grenoble, France

Introduction: Lithium-ion batteries are widely used as power sources for portable electronic devices (laptop, phones, and players) and electric cars ...

Simulation of the Shape of Micro Geometries Generated with Jet Electrochemical Machining

M. Hackert[1], G. Meichsner[2], and A. Schubert[1,2]
[1]Micromanufacturing Technology, Chemnitz University of Technology, Chemnitz, Germany
[2]Fraunhofer Institute of Machine Tools and Forming Technology, Chemnitz, Germany

Electrochemical Machining with a closed electrolytic free jet is a special procedure to generate complex micro structures by help of anodic ...

Optimization of the Lithium Insertion Cell with Silicon Negative Electrode for Automotive Applications

R. Chandrasekaran, and A. Drews
Research and Advanced Engineering
Ford Motor Company
Dearborn, MI

The US Advanced Battery Consortium (USABC) has established goals for long term commercialization of advanced batteries for electric vehicle ...