论文和技术资料

I. Tomashchuk [1], P. Sallamand [1], J.-P. Chateau-Cornu [1],
[1] Laboratoire Interdisciplinaire Carnot de Bourgogne, Université de Bourgogne-Franche-Comté, Le Creusot, France

The initiation in numerical modeling of welding with COMSOL Multiphysics® is proposed to the 2nd year ... 扩展阅读

Inclusive Routine of the Soil Surface Energy Balance in COMSOL Multiphysics®

M. Bortoloni[1], M. Bottarelli[2], Y. Su[3]
[1]Department of Engineering, University of Ferrara, Este, Italy
[2]Department of Architecture, University of Ferrara, Este, Italy
[3]Faculty of Engineering, University of Nottingham, Nottingham, UK

In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground ... 扩展阅读

Numerical Analysis of the Thermal Resistance of a Multi-Layer Reflective Insulation Material Enclosed by Cavities under Varied Angles

R.S. Pelzers[1], A.W.M. van Schijndel[2]
[1]Former student Building Physics, Department of the Built Environment, Eindhoven University of Technology, Eindhoven, The Netherlands
[2]Chair Building Physics, Department of the Built Environment, Eindhoven University of Technology, Eindhoven, The Netherlands

A numerical analysis on the thermal performance of a sample, consisting of two cavities surrounding a Multi ... 扩展阅读

Development of a Thermo-Hydro-Geochemical Model for Low-Temperature Geoexchange Applications

F. Eppner [1], P. Pasquier [1], P. Baudron [1],
[1] École Polytechnique de Montréal, Montréal, QC, Canada

Standing column wells (SCW) are open-loop geoexchange systems used to provide space heating and cooling to ... 扩展阅读

Thermal Performance of the New Bioclimatic Hall of the Historical Hospital in Florence

C. Balocco, and E. Marmonti
Dipartimento di Energetica “Sergio Stecco”
Università degli Studi di Firenze
Firenze, Italy

The main aim of the present work is the study of the thermal and energy performances of the new hall of the ... 扩展阅读

Enhanced Transient Modeling of Hybrid Photovoltaic Air (PVT) Module

R. Kiflemariam[1], M. Almaz[1], F. Zevallos[1], C. Lin[1]
[1]Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA

A 2D transient heat conduction model was created in COMSOL Multiphysics® software to study the performance of ... 扩展阅读

Simulation and Verification of Coupled Heat and Moisture Modelling

N. Williams Portal[1], M. van Aarle[2], and J. van Schijndel[2]
[1]Department of Civil and Environmental Engineering, Chalmers University of Technology, SE-412 96 Göteborg, Sweden
[2]Department of Architecture, Building and Planning, Technical University of Eindhoven, Eindhoven, The Netherlands

This paper includes the implementation and comparison of two types of moisture potentials for the combined ... 扩展阅读

Long-term Effects of Ground Source Heat Pumps on Underground Temperature

X. Zheng[1]
[1]Wayne State University, Detroit, MI, USA

This study set up a numerical model in COMSOL Multiphysics® and simulated the underground temperature over ... 扩展阅读

3D Simulation of Heat and Moisture Diffusion in Constructions

M. Bianchi Janetti, and F. Ochs
University of Innsbruck
Unit Building Physics
Innsbruck, Austria

The simulation of heat and moisture transfer represents an essential resource in designing energy efficient ... 扩展阅读

第一页

101–110 of 172

最后一页