论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

搜索：

Anisotropic Damping in MEMS Oscillator

S. Silvestrini [1],
[1] Delft University of Technology, Delft, Netherlands

The analyzed MEMS oscillator is composed by a spring (beam) supported mass that needs to vibrate with a high ... 扩展阅读

Electron Beam Crystallization of Amorphous Silicon Thin Films

S. Saager [1],
[1] Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology (FEP), Dresden, Germany

A promising method for low cost production of efficient silicon thin film solar cells is the electron beam ... 扩展阅读

Aerodynamic Analysis of a Ski Jumper: a CFD Approach

R. Latchman [1], A. Pooransingh [1],
[1] The University of the West Indies, St. Augustine, Trinidad and Tobago

At the 2006 Winter Olympics, the jump length difference between first and second place was only 5cm. This ... 扩展阅读

Thermal and Fluid-dynamical Optimisation of Passengers Comfort in a Touring Bus Cabin

G. Petrone[1], G. Fichera[2], and M. Scionti[1]
[1]Bus-Engineering S.r.l., Catania, Italy
[2]Department of Industrial and Mechanical Engineering, University of Catania, Catania, Italy

Innovations in air-conditioning and other forms of cooling or ventilation can be viewed as technological ... 扩展阅读

Determination of Process Parameters for Electron Beam Sintering (EBS)

M. F. Zäh, S. Lutzmann, M. Kahnert, and F. Walchshäusl
iwb Anwenderzentrum Augsburg, TU München, Augsburg, Germany

Additive Layer Manufacturing (ALM) methods, like Electron Beam Sintering (EBS), constitute an interesting ... 扩展阅读

基于 COMSOL 的 PVT 法 AlN 晶体生长仿真：温场对生长驱动力的影响研究

金雷 [1],
[1] 中国电子科技集团公司第四十六研究所，天津，中国

分别从软件模拟和晶体生长实验两方面对衬底表面的温度分布进行研究，进而达到控制 AlN 蒸气在衬底表面过饱和度的目的。理论上，结合异质形核理论（图1 (a)-(c)），采用 COMSOL Multiphysics® ... 扩展阅读

Integrating COMSOL into a Mathematical Modeling Course for Chemical Engineers

A. Dixon, and D. DiBiasio
Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

The multiphysics simulation package COMSOL was incorporated into a course in mathematical modeling for ... 扩展阅读

Design and Simulation of MEMS based PZT energy generator.

A. Deshpande[1]
[1]B.V.Bhoomaraddi College of Engineerring & Technology, Hubli, Karnataka, India

At present, a great deal of research effort has been directed to find eco-friendly and renewable sources of ... 扩展阅读

Tunnels, a New Potential Source of Energy: 3D Modeling of a Heat Exchanger within Tunnel Lining

C. Soussi [1], O. Fouché [2], G. Bracq [3], S. Minec [3],
[1] Le Cnam, Paris, France
[2] Ecole des Ponts, Champs-sur-Marne, France
[3] Bouygues Construction, Saint-Quentin-en-Yvelines, France

This work investigates the possibility of thermal activation of future tunnels to heat and/or cool the ... 扩展阅读

Topology Optimization of an Actively Cooled Electronics Section for Downhole Tools

S. Soprani [1], J. H. K. Haertel [1], K. Engelbrecht [1], B. S. Lazarov [2], O. Sigmund [2]
[1] Technical University of Denmark - Department of Energy Conversion and Storage, Roskilde, Denmark
[2] Technical University of Denmark - Department of Mechanical Engineering, Lyngby, Denmark

INTRODUCTION: Active cooling systems represent a possible solution to the electronics overheating that occurs ... 扩展阅读

第一页

131–140 of 293

最后一页