论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2025 论文

搜索：

Simulating Transport and Adsorption of Organic Contaminants in 3D Porous Activated Carbon Block Media

J. Kim[1], A. Morgott[2], Z. Wu[2], L. Hopaluk[2], M. Miles[2], W. Stoner[2], Q. Li[1]
[1]Rice University, USA
[2]Access Business Group, USA

Granular and powdered activated carbons have been widely used for purification/filtration in air and water as ... 扩展阅读

Plasma Edge Simulations by Finite Elements using COMSOL

C. Hollenstein, and A. Howling
Ecole Polytechnique Fédérale de Lausanne, Switzerland

Finite elements using COMSOL Multiphysics have been used to simulate the edge plasma in a large area ... 扩展阅读

Analysis of an Electromagnet for Diverse Safety Rod Drive Mechanism

N. Subbulu[1], P. Sharma[1], V. Sharma[1], S.K. Das[1], R. Veerasamy[1], B. Krishnakumar[1], P. Kalyanasundaram[1], and G. Vaidyanathan[1]
[1] Fast Reactor Technology Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu, India

Prototype Fast Breeder Reactor (PFBR) has two independent, diverse, fast acting & fail safe shut down ... 扩展阅读

Pseudo 3-D Simulation of a Falling Film Microreactor

M. Al-Rawashdeh[1,2], V. Hessel[1,2], P. Löb[1], and F. Schönfeld[1]
[1]Institut für Mikrotechnik Mainz GmbH, Mainz, Germany
[2]Department of Chemical Engineering and
Chemistry, Eindhoven University of Technology, Eindhoven, Netherlands

Gas-liquid falling film microreactors carry out fast exothermic and mass transfer limited reactions. Since ... 扩展阅读

COMSOL Multiphysics® Model for Optimizing Regeneration of CFP Catalyst in Packed-Bed Reactors

B. Adkins[1], J. Parks II[1], K. Iisa[2], K. Smith[2]
[1]Oak Ridge National Laboratory, USA
[2]National Renewable Energy Laboratory, USA

The DOE BETO consortium "ChemCatBio" has developed a packed bed catalyst for use in a Catalytic Fast ... 扩展阅读

Optimization of Flow Distribution in the Feed Sparger of a Steam Drum

P. Goyal[1], A. Dutta[1], and A. K. Ghosh[1]
[1] Reactor Safety Division, Bhabha Atomic Research Centre, Trombay, Mumbai, Maharashtra, India

Steam drums of a nuclear power plant separate steam from the steam water mixture and sub cooled incoming feed ... 扩展阅读

Top-blown rotary converter preheating and charge heating with an oxy-fuel burner

Sergey Semenov¹, Patrick Namy¹, Aditya Kale², Sello Tsebe²
¹SIMTEC, Grenoble, France
²MINTEK, Randburg, South Africa

Present work is done in the framework of the SisAl Pilot EU project, which aims at optimising the silicon ... 扩展阅读

Simulation of Surface Chemical Reactions in a Monolith Channel for Hydrogen Production

N. Pacheco[1], D. Pavone[1], K. Surla[1], J. Houzelot[2], and E. Schaer[2]
[1]IFP-Lyon, Solaize, France
[2]ENSIC, Solaize, France

This paper intends to show a model of a monolithic reactor for the autothermal reforming process (ATR), a ... 扩展阅读

Simulation as Various Operating Condition for High Temperature Magnesium Hydride Reactors

D.Y. Shin, T.E. Kim, J.Y. Lee
Altsoft Inc., Seoul, South Korea

Magnesium hydride (MgH2) has been one of the most promising hydrogen storage methods that can be applied to ... 扩展阅读

Beyond the limits of mass transfer: How pillar electrodes influence electrochemical reactors

Michiel De rop¹, Jonas Hereijgers¹, Tom Breugelmans¹
¹University of Antwerp, Antwerp, Belgium

Electrochemistry is inherent a surface process, requiring the transport of reagents towards the electrode ... 扩展阅读

第一页

141–150 of 449

最后一页