论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

搜索：

A Multiphase Model to Analyze Transport Phenomena In Convective Drying

S. Curcio, and M. Aversa
Department of Engineering Modelling, University of Calabria, Rende, Italy

In the modern food industry one of the most important problems to face is to preserve products from ... 扩展阅读

Advanced Multiphysics Thermal Hydraulic Models for the High Flux Isotope Reactor

P. K. Jain [1], J. D. Freels [1],
[1] Oak Ridge National Laboratory, Oak Ridge, TN, USA

Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high ... 扩展阅读

Laminar Thermal Mixing in Coating Flows

A. Haas[1], M. Scholle[1], A. Aksel[1], H.M. Thompson[2], R.W. Hewson[2], and P.H. Gaskell[2]

[1]Department of Applied Mechanics and Fluid Dynamics, University of Bayreuth, Bayreuth, Germany
[2]School of Mechanical Engineering, University of Leeds, Leeds, United Kingdom

Heat transfer in a plane shear flow configuration consisting of two infinitely long parallel plates is ... 扩展阅读

Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations

J. van Schijndel[1], C. van Dronkelaar[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

Solar radiation is a prominent contributor of energy in buildings, and can be transmitted directly into a ... 扩展阅读

Cooling Study of Baffles Integration in the Molding Industry

B. Noailles [1] , S. Meunier [1], V. Bruyere [2]
[1] RocTool, Savoie Technolac, Module R, France
[2] SIMTEC, France

In the molding industry, high productivity rate, low energy consumption, large 3D parts, and homogeneous ... 扩展阅读

Drift-Diffusion and Ballistic Transport Modeling in III-Nitride Multiple-QW Light Emitting Structures

M.V. Kisin, and H.S. El-Ghoroury
Ostendo Technologies Inc., Carlsbad, CA, USA

COMSOL-based modeling software developed at Ostendo Technologies allows detailed simulation of semiconductor ... 扩展阅读

Towards a Microscopic Model for Species Transport in Lithium-Sulphur Cells

Geraint Minton [1], Rajlakshmi Purkayastha [1], Laura O’Neill [1], Sylwia Walus [1], Mark Wild [1], Monica Marinescu [2], Teng Zhang [2], Gregory Offer [2],
[1] Oxis Energy Ltd, Abingdon, Oxfordshire, UK
[2] Mechanical Engineering Department, Imperial College, London, UK

Lithium-sulphur (Li-S) batteries have the potential to surpass the energy storage capability of Li-ion ... 扩展阅读

Modeling and Analysis of Aberrations in Electron Beam Melting (EBM) Systems

D. Svensson [1], A. Azhirnian [2],
[1] Arcam AB, Mölndal, Sweden
[2] Chalmers University of Technology, Gothenburg, Sweden

Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides ... 扩展阅读

A Study on the Suitability of Indium Nitride for THz Plasmonics

A. Shetty[1], K. J. Vinoy[1], S. B. Krupanidhi[2]
[1]Electrical Communication Engineering, Indian Institute of Science, Bangalore, India
[2]Materials Research Centre, Indian Institute of Science, Bangalore, India

As interest in the electromagnetic spectrum expands towards the infrared and terahertz range, the distinct ... 扩展阅读

Modeling Light Propagation in Skin for Visualization of Subcutaneous Veins

H. Kwon[1], R. Huancaya[1]
[1]Andrews University, Berrien Springs, MI, USA

Vein visualization systems such as the VeinViewer are vein-contrast enhancement devices that use an infrared ... 扩展阅读

第一页

171–180 of 293

最后一页