论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2025 论文

搜索：

Effect of Intercalation Diffusivity When Simulating Mixed Electrode Materials in Li-Ion Batteries

E. Wikner [1],
[1] Chalmers University of Technology, Gothenburg, Sweden

This paper is about the influence of the diffusion coefficient when simulating mixed electrode materials. The ... 扩展阅读

Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions

M. Bianchi Janetti[1], F. Ochs[1]
[1]University of Innsbruck, Innsbruck, Austria

Introduction: The simulation of coupled heat and moisture transfer in constructions is becoming even more ... 扩展阅读

Modeling of Supercapacitor

G. Madabattula[1], S. K. Gupta[1]
[1]Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India

Low cost high energy density batteries that can be charged and discharged rapidly are required in a number of ... 扩展阅读

Coupled Heat and Mass Transfer Model to Simulate Hygrothermal Behavior of Bio-Based Materials

M. Asli [1], F. Brachelet [1], A. Chauchois [1], E. Antczak [1]
[1] Université d'Artois, Béthune, France

This poster presents a numerical modeling approach for hygrothermal behavior of bio-based materials. The ... 扩展阅读

Application of COMSOL Multiphysics® Software to Model Temperature Changes in Buildings with PCM Incorporated in Their Elements

N. P. Sharifi [1], A. A. N. Shaikh [1], A. R. Sakulich [1],
[1]Department of Civil and Environmental Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

Reducing HVAC energy consumption in buildings has provoked a lot of thought and has, subsequently, drawn a ... 扩展阅读

Influence of a Porous Corrosion Product Layer on the Corrosion Phenomenon of Carbon Steel Pipelines

M. Mohamed-Saïd [1], P. Namy [1],
[1] SIMTEC, Grenoble, France

Assessing the severity of the internal corrosion of structures is of paramount importance in the oil & ... 扩展阅读

Flow Optimization of a MVHR Combined with an Exhaust Air Heat Pump by Means of CFD Simulation

F. Ochs [1], M. Bianchi Janetti [1], M. Romani [2],
[1] University of Innsbruck, Unit Energy Efficient Buildings, Austria
[2] Galletti Group, Italy

In the framework of the Austrian FFG project SaLüΗ!, a compact mechanical ventilation system with integrated ... 扩展阅读

Design and Analysis of CO2 Sensor using COMSOL Multiphysics® Software

S. B. Umbarkar[1], G. Y. Rajput[1], R. Vasappanavara[1],
[1] Department of Electronics Engineering, RAIT, Navi Mumbai, Maharashtra, India.

In this paper, a carbon dioxide sensor is introduced. At present many CO2 sensors are available, but they all ... 扩展阅读

Simulation of the Acoustic Environment for the Manufacture of Graded Porosity Materials by Sonication

C. Torres-Sanchez, and J. R. Corney
University of Strathclyde, United Kingdom

Many materials require functionally graded cellular microstructures whose porosity is engineered to meet ... 扩展阅读

Residual Stresses in a Panel Manufactured Using EBF3 Process

J. Gaillard[1], D. Locatelli[2], S. Mulani[3], and R. Kapania[3]
[1]Microelectronics and Micromechanics Department, Engineering school of ENSICAEN (Ecole National Superieure d'Ingénieurs de Caen), Caen, France
[2] Engineering Science and Mechanics Department, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA
[3] Aerospace and Ocean Engineering Department, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA

The residual stresses developed in a stiffened panel manufactured using Electron Beam Freeform Fabrication ... 扩展阅读

第一页

281–290 of 646

最后一页