论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

All

Boston 2024

Florence 2024

Numerical Simulation of Pulsed TIG Welding Partial and Full Penetration

A. Traidia[1][2], F. Roger[1], and E. Guyot[2]

[1]Ecole Nationale Supérieure de Techniques Avancées, Palaiseau, France
[2]AREVA NP, Centre Technique Soudage, France

In this poster, a numerical model of spot pulsed current TIG welding for partially and fully penetrated weld ... 扩展阅读

A Study of Optical Sensor Based on Fiber Bragg Grating Using COMSOL Multiphysics^®

C. Gavrila[1] and I. Lancranjan[2]

[1]Technical University of Civil Engineering Bucharest, Bucharest, Romania
[2]Advanced Study Centre, National Institute for Aerospace Research “Elie Carafoli”, Bucharest, Romania

Fiber optic sensors can measure a large range of physical, chemical and environmental variables such as ... 扩展阅读

Streamer Propagation in a Point-to-Plane Geometry

M. Quast[1] and N.R. Lalic[1]
[1]Gunytronic GmbH, St Valentin, Germany

Corona discharge is used in several applications such as surface treatment of polymers, photocopying or dust ... 扩展阅读

Radionuclide Transport Through Different Routes Near a Deposition Hole for Spent Nuclear Fuel

V-M.S. Pulkkanen[1]

[1]VTT, Technical Research Centre of Finland, Espoo, Finland

Radionuclide transport modeling is a part of the research concerning geological disposal of spent nuclear ... 扩展阅读

Underground Coal Fire Extinction Model Using Coupled Reactive Heat and Mass Transfer Model in Porous Media

S. Suhendra[1], M. Schmidt[1], and U. Krause[1]
[1]Laboratory II.2: “Flammable Bulk Materials and Dusts, Solid Fuels”, Federal Institute for Materials Research and Testing (BAM), Berlin, Germany

Green house gases emission associated with natural hazard of underground coal seam fire has been recognized ... 扩展阅读

Modelling of Heat and Mass Transfer in Food Products

[1]M.B. Andreasen

[1]Danish Technological Institute, Aarhus C, Denmark

The use of the finite element method for understanding and analyzing the freezing and drying processes of ... 扩展阅读

High Temperature Process Simulation: An Example in Crystal Growth

H. Rouch[1] and O. Geoffroy[1]
[1]INOPRO, Villard de Lans, France

High temperature processes are used in a large variety of industrial application. Simulation helps to solve ... 扩展阅读

Fluid Flow and Heat Transfer Characteristics in a Stirred Cell System for Crude Oil Fouling

M. Yang[1], A. Young[1], and B. Crittenden[1]

[1]Department of Chemical Engineering University of Bath, Bath, United Kingdom

A small batch stirred cell which is operated at temperatures up to 400 °C and pressures up to 30 bar is ... 扩展阅读

Punch Design for Uniaxial Forging Process of γ-TiAl Using COMSOL Multiphysics^®

R. Cagliero[1] and G. Maizza[1]
[1]Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Torino, Italy

The increasing demand for improved metallurgical products strongly motivates the optimization of ... 扩展阅读

Modeling of High-Temperature Ceramic Membranes for Oxygen Separation

J.M. Gozálvez-Zafrilla[1], J.M. Serra[2], and A. Santafé-Moros[1]

[1]Chemical and Nuclear Engineering Depart., Universidad Politécnica de Valencia, Valencia, Spain
[2]Instituto de Tecnología Química, Valencia, Spain

Oxygen transfer through ceramic membranes at high-temperature can substantially reduce costs respect to ... 扩展阅读

第一页

5181–5190 of 5983

最后一页