论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2025 论文

All

Boston 2025

搜索：

"sensor"

Dynamic Simulation of Electrochemical Etching of Silicon with COMSOL

A. Ivanov[1], U. Mescheder[1]
[1]Furtwangen University, Furtwangen, Germany

In the presented work the dynamic simulation of a silicon anodization process is performed. Two mechanisms of ... 扩展阅读

Simulation and Analysis of a Borehole Transient Electromagnetic Reservoir Monitoring System

S.M. Dutta[1], A. Reiderman[1]
[1]Baker Hughes, Houston, TX, USA

Waterflooding and steam-flooding are used worldwide for EOR. Recently, CO2-flooding has attracted global ... 扩展阅读

Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator

B. Li[1], J.H. You[1]
[1]Southern Methodist University, Dallas, TX, USA

An acoustic energy harvesting mechanism at low frequency (~200 Hz) using lead zirconate titanate (PZT) ... 扩展阅读

Quartz Transducer Modeling for Development of BAW Resonators

L.B.M. Silva[1], E.J.P. Santos[1]
[1]Laboratory for Devices and Nanostructures, Electronics and Systems Department, Universidade Federal de Pernambuco, Recife, PE, Brasil

Transducer optimization is a key aspect for successful development and deployment of advanced sensors, ... 扩展阅读

Design and Development, via Prototype Testing and Multiphysics Modelling, of a Thermoelectric Generator (TEG) for Integration in Autonomous Gas Heaters

M. P. Codecasa[1], C. Fanciulli[1], R. Gaddi[2], F. Gomez Paz[3], and F. Passaretti[1]
[1]National Research Council of Italy - IENI Institute, Lecco, Italy
[2]Italkero S.r.l., Modena, Italy
[3]Studio di design Francisco Gomez Paz, Milano, Italy

An autonomous gas-heater for outdoor environments was selected as a test-case for cogeneration in gas-heaters ... 扩展阅读

3D Simulations of an Injection Test Done Into an Unsaturated Porous and Fractured Limestone

A. Thoraval[1], Y. Guglielmi[2], F. Cappa[3]
[1]INERIS, Nancy, France
[2]CEREGE, Aix-en-Provence, France
[3]GEOAZUR, Valbonne, France

We have developed a numerical model to represent the effect of injection test in unsaturated porous and ... 扩展阅读

Battery Pack Temperature Distribution Simulation with COMSOL and MATLAB®

M. Masomtob[1], C. Schaeper[1], W. Zhou[1], D. Uwe Sauer[1]
[1]Electrochemical Energy Conversion and Storage Systems Group, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Aachen, Germany

This work is to present an implementation of COMSOL with MATLAB® [1] for the liquid cooling system of a ... 扩展阅读

FSI Analysis of Microcantilevers Vibrating in Fluid Environment

A. Ricci[1] and E. Giuri[1]

[1]Materials and Microsystems Laboratory (CHI-Lab), Politecnico di Torino, Torino, Italy

Cantilever vibration in fluid environment is probably one of the most common Fluid Structure Interaction ... 扩展阅读

Experimental Validation of Model of Electro-Chemical-Mechanical Planarization (ECMP) of Copper

J. Ebert[1], S. Ghosal[1], A. Emami-Naeini[1]
[1]SC Solutions, Sunnyvale, CA, USA

This paper describes the development of a COMSOL model of Electro-Chemical-Mechanical Planarization (ECMP) ... 扩展阅读

第一页

671–679 of 679

下一页 |

最后一页