论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

搜索：

COMSOL® Simulation of Blister Actuated Laser Induced Forward Transfer (Ba-LIFT)

M. Morales [1], , J. J. Moreno [1] , D. Munoz-Martin [1] , C. Molpeceres [1]
[1]Centro Láser UPM, Universidad Politécnica de Madrid, Madrid, Spain

Laser-induced forward transfer (LIFT) is a non-contact direct-write technique that enables the deposition of ... 扩展阅读

Transient Process Simulation of Heat Transfer in Laser Beam Welding with an Equivalent Heat Source

A. Artinov [1], M. Bachmann [1], M. Rethmeier [1],
[1] BAM Federal Institute for Material Research and Testing, Berlin, Germany

The Finite Element Method (FEM) has become an established numerical tool used for different academic and ... 扩展阅读

Investigation of Ablation of a Copper Surface Caused by 220 Nanosecond Laser Pulse

M. Dillmann [1], B. Braun [1], M. Kottcke [1],
[1] Technische Hochschule Georg-Simon-Ohm, Nuernberg, Germany

This work investigates the ablation of a copper surface caused by the irradiation of a 220 ns laser pulse. ... 扩展阅读

Electrothermoplasmonic Flow in Gold Nanoparticle Suspensions

Emilio Ruiz-Reina¹, Carlos David Gónzalez-Gómez¹, Raúl A. Rica²
¹University of Málaga, Málaga, Spain
²University of Granada, Granada, Spain

Efficient mixing and pumping of liquids at the microscale is a technology that is still to be optimized. The ... 扩展阅读

Process simulation of Directed Energy Deposition process using COMSOL Multiphysics®

Vaibhav Nain¹
¹IREPA LASER

The process-induced deformation in the DED fabricated part is a critical issue to the scaling of the ... 扩展阅读

Modeling of a Hybrid-Integrated Moving Magnet Drive for a Quasi-Static 2D-MEMS Vector Scanner

Klemens Birnbaum¹, Martin Blasl², Benjamin Mustin², Thilo Sandner²
¹Institute of Automation, Faculty of Electrical and Computer Engineering, TUD Dresden University of Technology, 01062 Dresden, Germany
²Fraunhofer Institute for Photonic Microsystems, Maria-Reiche-Str. 2, 01109 Dresden, Germany

Quasi-static 2D-MEMS vector scanners are micro-opto-electro-mechanical systems (MOEMS) made of ... 扩展阅读

Design and Simulation of an Additive Manufactured Microwave Cavity for Compact Cold Atom Clocks

C. Affolderbach¹, E. Batori¹, G. Mileti¹
¹University of Neuchâtel, Neuchâtel, Switzerland

We present the design and performance simulations for a microwave cavity for use in novel compact cold atom ... 扩展阅读

Geometric Multigrid Solver and Experimental Validation in Laser Surface Remelting

M. M. Pariona [1], F. de Oliveira [1],
[1] State University of Ponta Grossa, PR, Brazil

INTRODUCTION The purpose of this work is to verify the effect of Multigrid method on the CPU time for the ... 扩展阅读

Thermo-Mechanical Simulation of Dissimilar Titanium Alloys Laser Welding

A. Mathieu [1], L. Weiss [2], E. Fleury [2]
[1] Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), CNRS-Université de Bourgogne Franche-Comté, Dijon, France
[2] Laboratoire d’Etudes des Microstructures et de Mécanique des Matériaux (LEM3), CNRS- Université de Lorraine, Ile du Saulcy, Metz, France

A 3D thermo-mechanical simulation was developed using COMSOL Multiphysics software in order to predict ... 扩展阅读

COMSOL Assisted Simulation of Laser Engraving

H. Karbasi
Conestoga College, Kitchener, ON, Canada

The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of ... 扩展阅读

第一页

71–80 of 507

最后一页