论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2025 论文

搜索：

Structural Mechanics and Thermal Stresses

Fatigue Damage Evaluation on Mechanical Components under Multiaxial Loadings

R. Tovo[1] and S. Capetta[1]
[1]Dipartimento di Ingegneria, Università degli Studi di Ferrara, Ferrara, Italy

This paper is concerned with the fatigue behavior of complex, three-dimensional, stress concentrations under ... 扩展阅读

Multibody Contact Analysis of an Rzeppa CV-Joint

L. Armellin[1], F. Gatelli[1], and G. Tanghetti[1]

[1]R&D Department, Metelli S.p.A., Cologne, BS, Italy

Ball joints are widely used in many applications. This paper describes the contact and kinematic analysis of ... 扩展阅读

Numerical and Experimental Study of a Concentrated Indentation Force on Polymer Matrix Composites

V. Antonucci[1][2], M. Esposito[1], R. Marzella[2], and M. Giordano[1][2]
[1]Institute for Composite and Biomedical Materials, CNR, Portici, NA, Italy
[2]Imast, Portici, NA, Italy

A quasi static indentation test on a laminate composite has been investigated numerically and experimentally. ... 扩展阅读

A Numerical Study for Rubber Particles Collection Involved in New Thermoforming Composite Process Using COMSOL Multiphysics^®

R. Carbone[1], V. Antonelli[2][3], A. Langella[1], and R. Marissen[3]

[1]Material and Production Engineering Department, Università degli Studi di Napoli Federico II, Napoli, Italy
[2]Institute of Lightweight Structures, Technische Universität München, München, Germany
[3]Design and Production of Composite Structure, Delft University of Technology, Delft, The Netherlands

This paper deal of the forming process applied to the thermoplastic composites. A new thermoforming process ... 扩展阅读

Calculus of the Elastic Properties of a Beam Cross Section

A. Genoese[1], A. Genoese[1], and G. Garcea[1]
[1]Dipartimento di Modellistica per l'Ingegneria, Università della Calabria, Arcavacata di Rende, CS, Italy

Saint-Venant general rod theory is used to calculate the elastic factors of a section through the numerical ... 扩展阅读

Dynamic Crack Propagation in Fiber Reinforced Composites

C. Caruso[1], P. Lonetti[1], and A. Manna[1]

[1]Department of Structural Engineering, University of Calabria, Arcavacata di Rende, CS, Italy

A generalized model to predict dynamic crack propagation in fiber composite structures is proposed. The ... 扩展阅读

Energy Transformation Damping

G.S. Mulder[1]
[1]Leiden, The Netherlands

A model for material damping is presented in terms of internal friction and in terms of a variation of ... 扩展阅读

Simulation of a Modular Die Stamp for Micro Impact Extrusion

A. Schubert[1][2], R. Pohl[1], and M. Hackert[1]
[1]Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, Chemnitz, Germany
[2]Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany

Micro impact extrusion is investigated at Chemnitz University of Technology as a potential procedure for ... 扩展阅读

Punch Design for Uniaxial Forging Process of γ-TiAl Using COMSOL Multiphysics^®

R. Cagliero[1] and G. Maizza[1]
[1]Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Torino, Italy

The increasing demand for improved metallurgical products strongly motivates the optimization of ... 扩展阅读

Determination of Process Parameters for Electron Beam Sintering (EBS)

M. F. Zäh, S. Lutzmann, M. Kahnert, and F. Walchshäusl
iwb Anwenderzentrum Augsburg, TU München, Augsburg, Germany

Additive Layer Manufacturing (ALM) methods, like Electron Beam Sintering (EBS), constitute an interesting ... 扩展阅读

第一页

551–560 of 646

最后一页