Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Has Anyone tried Sediment Transport Modeling using COMSOL?
Posted 2016年8月17日 GMT-4 12:31 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to model sediment transport in a closed geometric shape through a porous breakwater. Which physics I should apply? Has anyone tried modeling sediment transport or wave attenuation using COMSOL?
1 Reply Last Post 2016年8月22日 GMT-4 10:15
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Dear Salman,
The fluid flow part is a multi-phase flow problem, and can be handled through the CFD Module.
On top of the fluid flow, you can model the sedimentation process using scalar transport equations, in this case the Chemical Reaction Engineering Module can be of help. Or you can use the Particle Tracing Module to model the sedimentation.
Best regards,
Mao Mao, PhD
COMSOL, Inc.
The fluid flow part is a multi-phase flow problem, and can be handled through the CFD Module.
On top of the fluid flow, you can model the sedimentation process using scalar transport equations, in this case the Chemical Reaction Engineering Module can be of help. Or you can use the Particle Tracing Module to model the sedimentation.
Best regards,
Mao Mao, PhD
COMSOL, Inc.