Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Finding coordinates and dimensions of a point in COMSOL model

Posted 2017年6月20日 GMT-4 12:22 Version 5.2a 4 Replies

Saurabh Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have imported a CAD model into COMSOL. But I am not able to find out the coordinates and size of a small pipe in the model. I want to know the dimensions of the pipe and its position in the model exactly so that I can make some desired changes to the model. Please help in finding those details.
4 Replies Last Post 2017年7月13日 GMT-4 12:00
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年6月20日 GMT-4 12:33
Hello Saurhab,
Use the Measure tool found on the Geometry ribbon for that. When a point is selected it will return its coordinates. When a surface is selected, it will return its surface area.
Best,
Jeff
Hello Saurhab, Use the Measure tool found on the Geometry ribbon for that. When a point is selected it will return its coordinates. When a surface is selected, it will return its surface area. Best, Jeff
Saurabh Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年7月2日 GMT-4 20:07
Thanks Jeff,

It's a very important tool in COMSOL modeling.

Can you explain how to incorporate a new equation in COMSOL model for reaction engineering which is not inbuilt in COMSOL?

Saurabh
Thanks Jeff, It's a very important tool in COMSOL modeling. Can you explain how to incorporate a new equation in COMSOL model for reaction engineering which is not inbuilt in COMSOL? Saurabh
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年7月13日 GMT-4 11:43
Hi Saurabh,
I suggest you start a separate thread, as this new question is unrelated to the current thread. You will be more likely to get answers.
Best,
Jeff
Hi Saurabh, I suggest you start a separate thread, as this new question is unrelated to the current thread. You will be more likely to get answers. Best, Jeff
Saurabh Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年7月13日 GMT-4 12:00
Hi Jeff,


Thanks a lot for your precious advice.

Saurabh
Hi Jeff, Thanks a lot for your precious advice. Saurabh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content