Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Applying a measured magnetic flux density to a model in Comsul

Please login with a confirmed email address before reporting spam

Hi,

I measured the magnetic flux desity between two electromagnets in laboratory. Its about 1 Tesla.
Now I want to apply this measurements to my model in Comsul.

I used the "magnetic field, no currents"-Solver and added "Magnetic Flux Conservation".

Unfortunately there is no way to apply the measured magnetic flux density [T] to the model. I can use "Magnetization" [A/m] or "Remanent flux density " [B_r]. But this is not that what i am looking for.

Two month ago there was a user who had the same Issue, unfortunately nobody helped him.
www.comsol.com/community/forums/acdc-module/thread/138061/

Is there anyone who can help me/us?

Many thanks in advance !

1 Reply Last Post 2017年7月10日 GMT-4 06:14

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年7月10日 GMT-4 06:14
Any Ideas?
... I still got this Problem.
Any Ideas? ... I still got this Problem.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.