Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to add moisture expansion co-efficient to any comsol model
Posted 2017年12月21日 GMT+8 20:44 Heat Transfer & Phase Change, Structural Mechanics Version 4.2 2 Replies
Please login with a confirmed email address before reporting spam
Can anyone plz tell me that how to add moisture expansion co-efficient or relative humidity to my comsol model.
Please login with a confirmed email address before reporting spam
Hello Rahul,
Hygroscopic swelling is a functionality available in the Structural Mechanics Module and MEMS Module, starting at version 5.1. This blog contains an introduction to it: https://www.comsol.com/blogs/how-to-model-hygroscopic-swelling/ .
Best regards,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Respected sir, first of all thank you very much for your kind suggestion, now i have comsol version 5.2. Now i am trying to input the values of moisture content, (delta C) = 0%, 1%, 2% and Temperature (delta T = 0, 20K, 40K) and want to analyse their coupling effect. I am working in solid mechanics module and trying to find out the eigenfrequency of FGM beam. plz reply asap. Thanks/Regards Rahul Singh (PG student)