Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem with Neumann boundary condition AD/DC module

Please login with a confirmed email address before reporting spam

Hello,

I want to calculate the electrical resistance of sphere with two small contact surfaces, first one is the inlet with V=1 Volt the second is the outlet with V=0 all the surfaces i impose n.j=0.

The solution shows that the electrical current is not a same in the inlet and outlet, i calculate it by integring the electrical density on the two surfaces. I obtain that the n.j on all the surfaces of the sphere exept the inlet and the outlet is not equal to zero.

How to impose a correct neumann boundary condition in this case?

How to calculate the electrical resistance i obtain a very weak resistance of order of 10^-5

Thak you

0 Replies Last Post 2011年7月7日 GMT-4 15:18
COMSOL Moderator

Hello Bourbatache Khaled

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.