Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
CHANGE the TIME STEP during the analysis
Posted 2011年12月16日 GMT-5 11:19 Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hello everybody,
I would like to know, if it is possible to change the time step during the analysis. E.g. at the beginning you need very small step and at the end it is ok with larger... or vice versa. Logarithmic function or something like that. I couldn't find anything in the help or in COMSOL settings. Does anybody know how to do it?
Thank you very much!
Katerina
I would like to know, if it is possible to change the time step during the analysis. E.g. at the beginning you need very small step and at the end it is ok with larger... or vice versa. Logarithmic function or something like that. I couldn't find anything in the help or in COMSOL settings. Does anybody know how to do it?
Thank you very much!
Katerina
1 Reply Last Post 2011年12月16日 GMT-5 15:54
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
one often define the time steps with a range() operator
i.e. range(0,0.1,1) = { 0 0.1 0.2 0.3 0.4 0.5 ... 0.9 1}
but you can also write
10^{range(-3,1,3)} = { 1E-3 1E-2 1E-1 1E0 1E+1 1E+2 1E+3 }
or any combination
0 0.001 range(0.1,0.2,1) range(10,0.1,11) 100 1000
etc, so long you define amonotonous set
--
Good luck
Ivar
one often define the time steps with a range() operator
i.e. range(0,0.1,1) = { 0 0.1 0.2 0.3 0.4 0.5 ... 0.9 1}
but you can also write
10^{range(-3,1,3)} = { 1E-3 1E-2 1E-1 1E0 1E+1 1E+2 1E+3 }
or any combination
0 0.001 range(0.1,0.2,1) range(10,0.1,11) 100 1000
etc, so long you define amonotonous set
--
Good luck
Ivar