Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Why do you need to specify a partition condition if you already know a species' permeability in a domain?

Rogelio Garcia Fernandez Certified Consultant

Please login with a confirmed email address before reporting spam

Hello community!

If a chemical species is moving (by concentration difference) from one liquid domain to a solid domain and then to another liquid domain, do you need to specify partition conditions at the two liquid-solid interfaces?

Shouldn't a simulation give realistic results if we just specified the chemical species' diffusion coefficient in the liquid phases and its permeability coefficient in the solid phase?

Is one overspecifying the diffusion model by including partition conditions?


3 Replies Last Post 2020年10月26日 GMT-4 08:02

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年10月25日 GMT-4 01:42

If you know the overall permeation coefficient (Kp) from, say, experiments, that would include partitioning. But if you just know the mobility (diffusion coefficient, D) of the transferring species in the solid, you need to take into account the partition coefficient, P.

Kp = PD/h (h = thickness of the solid phase)

Note that you need to consider partitioning on the both sides of the solid phase.

If you know the overall permeation coefficient (Kp) from, say, experiments, that would include partitioning. But if you just know the mobility (diffusion coefficient, D) of the transferring species in the solid, you need to take into account the partition coefficient, P. Kp = PD/h (h = thickness of the solid phase) Note that you need to consider partitioning on the both sides of the solid phase.

Rogelio Garcia Fernandez Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年10月25日 GMT-4 16:54

If you know the overall permeation coefficient (Kp) from, say, experiments, that would include partitioning. But if you just know the mobility (diffusion coefficient, D) of the transferring species in the solid, you need to take into account the partition coefficient, P.

Kp = PD/h (h = thickness of the solid phase)

Note that you need to consider partitioning on the both sides of the solid phase.

Thank you so much for your contribution. I really apprecite your time. One more question:

Is the partition coefficient the same at both sides of the solid phase? If so, what about if only one interface is expose to a liquid face with force convection?

>If you know the overall permeation coefficient (Kp) from, say, experiments, that would include partitioning. But if you just know the mobility (diffusion coefficient, D) of the transferring species in the solid, you need to take into account the partition coefficient, P. > >Kp = PD/h (h = thickness of the solid phase) > >Note that you need to consider partitioning on the both sides of the solid phase. Thank you so much for your contribution. I really apprecite your time. One more question: ***Is the partition coefficient the same at both sides of the solid phase? If so, what about if only one interface is expose to a liquid face with force convection?***

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年10月26日 GMT-4 08:02

Partition coefficient is purely a chemical quantity, the exponent of the difference between the stadrard chemical potentials in the two phases over RT:

P = exp[(µ°(1) ─ µ°(2))/RT]

Cheers Lasse

Partition coefficient is purely a chemical quantity, the exponent of the difference between the stadrard chemical potentials in the two phases over RT: P = exp[(µ°(1) ─ µ°(2))/RT] Cheers Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.