Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Why do you need to specify a partition condition if you already know a species' permeability in a domain?
Posted 2020年10月22日 GMT-4 13:08 Chemical, Chemical Reaction Engineering, Parameters, Variables, & Functions Version 5.5 3 Replies
Please login with a confirmed email address before reporting spam
Hello community!
If a chemical species is moving (by concentration difference) from one liquid domain to a solid domain and then to another liquid domain, do you need to specify partition conditions at the two liquid-solid interfaces?
Shouldn't a simulation give realistic results if we just specified the chemical species' diffusion coefficient in the liquid phases and its permeability coefficient in the solid phase?
Is one overspecifying the diffusion model by including partition conditions?
Please login with a confirmed email address before reporting spam
If you know the overall permeation coefficient (Kp) from, say, experiments, that would include partitioning. But if you just know the mobility (diffusion coefficient, D) of the transferring species in the solid, you need to take into account the partition coefficient, P.
Kp = PD/h (h = thickness of the solid phase)
Note that you need to consider partitioning on the both sides of the solid phase.
Please login with a confirmed email address before reporting spam
If you know the overall permeation coefficient (Kp) from, say, experiments, that would include partitioning. But if you just know the mobility (diffusion coefficient, D) of the transferring species in the solid, you need to take into account the partition coefficient, P.
Kp = PD/h (h = thickness of the solid phase)
Note that you need to consider partitioning on the both sides of the solid phase.
Thank you so much for your contribution. I really apprecite your time. One more question:
Is the partition coefficient the same at both sides of the solid phase? If so, what about if only one interface is expose to a liquid face with force convection?
Please login with a confirmed email address before reporting spam
Partition coefficient is purely a chemical quantity, the exponent of the difference between the stadrard chemical potentials in the two phases over RT:
P = exp[(µ°(1) ─ µ°(2))/RT]
Cheers Lasse