Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Is it possible to apply continuity pair and electrical insulation on different portions of an identity pair
Posted 2020年10月31日 GMT-4 00:59 Electromagnetics, Low-Frequency Electromagnetics, Geometry Version 5.5 2 Replies
Please login with a confirmed email address before reporting spam
The pictures attached shows the geometry i am working with, I have a domain sliding on top of another domain, and i am trying to apply continuity on the touching parts of the two domains while maintaining insulation on the remaining part of the lower geometry.
Any Suggestions are welcomed
Attachments:
Please login with a confirmed email address before reporting spam
I am well aware of the feedback node that is supposed to do exactly what i am asking for. however, Comparing the results of the current density over the domains when using create assembly and create union is different. Which makes me ask this question... If anyone has an explanation on why this is happening please inform me.
Please login with a confirmed email address before reporting spam
There is absolutly no problem, I just didnt match the meshes around the identity pair, which results in the bad results.