Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Convergence

Posted 2012年4月2日 GMT-4 04:50 Materials, Structural Mechanics Version 4.2a 1 Reply

Yasemin Kirli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

what effect has the "Contact penalty factor"?

You should shorten this factor by 1/2 or 1/3 for the convergence behaviour. Is that correct?

For example, if I do that, I get different reaction forces or other results.
How can I best handle with this problem?

Thank you.


Yasemin
1 Reply Last Post 2012年4月2日 GMT-4 14:37
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年4月2日 GMT-4 14:37
For many problems I find that changing the penalty factor by one order of magnitude does not affect results by much, which is how it should be. If your problem is that sensitive it is good to find out why. Two potential causes are loose convergence tolerances, and default contact stiffness too low for your problem.

Nagi Elabbasi
Veryst Engineering
For many problems I find that changing the penalty factor by one order of magnitude does not affect results by much, which is how it should be. If your problem is that sensitive it is good to find out why. Two potential causes are loose convergence tolerances, and default contact stiffness too low for your problem. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content