Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simple Acoustic

Please login with a confirmed email address before reporting spam

Hello,

I am trying to model a 2D acoustic time harmonic square (10x10[m]; left bottom corner at (0,0)).
At the top the pressure is 101325[Pa] and now I just wanted to get started with the gravity force as a kind of a load, but how can I implementate it to get a continous rise of the pressure?

The 2nd step should be to create a point-source which is located at (0,0). But this is as well unknown for me yet.

Thanks for any hints on this.
Nikolaus

1 Reply Last Post 2012年5月15日 GMT-4 06:49
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年5月15日 GMT-4 06:49
Hi

cant you load the system with a stationary solver case (before your time harmonic) and add a body force
Fz = -g_const*rho
And use the results of the stationary case as initial condition for the time harmonic ?

As I do not have Acoustic module I do not know if the bnody load is already in there, else you need to add a solid/structural physics, or find a coupled one

--
Good luck
Ivar
Hi cant you load the system with a stationary solver case (before your time harmonic) and add a body force Fz = -g_const*rho And use the results of the stationary case as initial condition for the time harmonic ? As I do not have Acoustic module I do not know if the bnody load is already in there, else you need to add a solid/structural physics, or find a coupled one -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.