Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

3D coil inductance with frequency domain

Posted 2012年5月17日 GMT-4 11:28 Low-Frequency Electromagnetics Version 4.2 0 Replies

Hongyu Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I modeled a coil to calculate the inductance in both 2d symmetric axis and 3d with frequency domain. It gives a rise an issue that the value of calculated inductances are different.

Since there is no directly option for inductance in 3D, I use the following fomula:
L=N*flux/I0
L: inductance
Flux: integration of magnetic flux density over a closed surface
N: number of turn
I0: the applied current

The value of inductance in 2D is equal to 5.0408e-5H, while in 3D is 4.226e-5H.
However, it gets closer to results from 2D when I changed frequency domain to stationary domain in 3D which is 5.0803e-5H.

Can anyone give me a favour?


Regards,
Hongyu Li

Attachments:

0 Replies Last Post 2012年5月17日 GMT-4 11:28
COMSOL Moderator

Hello Hongyu Li

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content