Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Porous media flow pattern

Posted 2021年4月28日 GMT-4 08:57 Computational Fluid Dynamics (CFD) Version 5.5 1 Reply

Till Henrich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I'm often facing a strange behaviouz in the flow pattern in porous media. The velocity close to the wall begins to oscillate. The closer to the wall the stronger the oscillations. At the wall itself the velocity is 0 as expected. So, my question is: What causes these oscillations and what to do to avoid them?

Thanks in advance!

Till

1 Reply Last Post 2021年4月29日 GMT-4 05:18
Hinrich Arnoldt COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年4月29日 GMT-4 05:18

Dear Till,

this sounds like some numerical issue from either meshing or time stepping (if you have a time dependent solver). Please go to www.comsol.de/support and load up the model in a support case.

Kind regards Hinrich

Dear Till, this sounds like some numerical issue from either meshing or time stepping (if you have a time dependent solver). Please go to www.comsol.de/support and load up the model in a support case. Kind regards Hinrich

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content