Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Avoiding sharp edge and having a curvature

Posted 2012年7月16日 GMT-4 07:36 Geometry Version 4.2 2 Replies

Vijay Ramakrishnan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear sir,
I want to know if there is an option for a line similar to 'fillet' to smoother vertices. I want to avoid having sharp perpendicular edges and instead try to have a curved surface connecting 2 perpendicular faces.
Thanking you in advance,
Vijay
2 Replies Last Post 2015年12月4日 GMT-5 10:08
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月16日 GMT-4 14:28
Hi

unfortunately I know only of the 2D fillet (and no 2D champfer, nor 3D fillet) in COMSOL.

There is a thread for about 1-2 years ago about how to make a cube or a block with all filleted edges, try a search on the Forum

--
Good luck
Ivar
Hi unfortunately I know only of the 2D fillet (and no 2D champfer, nor 3D fillet) in COMSOL. There is a thread for about 1-2 years ago about how to make a cube or a block with all filleted edges, try a search on the Forum -- Good luck Ivar
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年12月4日 GMT-5 10:08
Update on this thread: Nowadays COMSOL does include a direct 3D filleting capability in the Design Module. See www.comsol.com/design-module
Best,
Jeff
Update on this thread: Nowadays COMSOL does include a direct 3D filleting capability in the Design Module. See www.comsol.com/design-module Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content