Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fixing color bar

Posted 2012年7月18日 GMT-4 05:16 Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics Version 4.2a 2 Replies

Hiro.S. Katayama
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

I have been searching how to fix color bar at certain range( ex. 0.0 ~ 0.3) of velocity at Export>Player .
If you know, please teach me how to fix.

Thanks in advance.

Hiro.S.Katayama
2 Replies Last Post 2012年7月18日 GMT-4 10:01
Binjie Dong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月18日 GMT-4 07:53
Hi,

you should change the color range to "manual color range" in ploting interface for velocity but not in "export interface". then when you export the reulst, you will get the right color range.
Hi, you should change the color range to "manual color range" in ploting interface for velocity but not in "export interface". then when you export the reulst, you will get the right color range.
Hiro.S. Katayama
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月18日 GMT-4 10:01
Great!
I solved that problem.

Thank you very much!
Great! I solved that problem. Thank you very much!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content