Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
RF Heating
Posted 2022年2月25日 GMT-5 02:29 Electromagnetic Heating 0 Replies
Please login with a confirmed email address before reporting spam
Hello I want to use COMSOL to simulate the response of pyroelectric detector with electromagnetic heating. By using the RF module and solid heat transfer module of COMSOL, I got the results of electromagnetic heating. However, it is learned from subsequent papers that the detection response of pyroelectricity is obtained in periodic irradiation or pulse irradiation. One paper mentioned: the electromagnetic simulations were then coupled into a soildstate heat transfer simulation, where the heat source is spatially defined by the absorber power density and temporally defined by a 100 fs FWHM Gaussian pulse. That is, the energy distribution generated by RF is used as the spatial input of solid heat transfer analysis, and it is a pulse in time. I really don't know how to realize this time control (100 femtosecond Gaussian pulse). I hope you can give me some advice!
Hello 永图 邹
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.