Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Depth varying distributed load

Posted 2023年3月9日 GMT-5 07:29 3 Replies

Joe Brady
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, i would like to create a load that is varying with depth, however i cannot figure out how to do this in solid mechanics. The sort you would expect to see with water.

3 Replies Last Post 2023年3月13日 GMT-4 04:39
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年3月9日 GMT-5 08:17

Attached is an example where the water level is even rising with time.

-------------------
Henrik Sönnerlind
COMSOL
Attached is an example where the water level is even rising with time.

Attachments:

Joe Brady
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年3月10日 GMT-5 08:29

Attached is an example where the water level is even rising with time.

Hi Henrik, I hope you are well. I have solved how to create such loading scenario, however i need to obtain the bending moment across the whole domain to see what the maximum bending moment is (not reaction moment), however i have noticed that COMSOL doesn't provide an easy way to find this.

I have found online some things about probes, but they all seem to use an expression which i do not have on my version of COMSOL, despite having all of the modules installed.

Are you familiar with anyways in which i can find the maximum/minimum bending moment across my element?

Thanks, Joe.

>Attached is an example where the water level is even rising with time. Hi Henrik, I hope you are well. I have solved how to create such loading scenario, however i need to obtain the bending moment across the whole domain to see what the maximum bending moment is (not reaction moment), however i have noticed that COMSOL doesn't provide an easy way to find this. I have found online some things about probes, but they all seem to use an expression which i do not have on my version of COMSOL, despite having all of the modules installed. Are you familiar with anyways in which i can find the maximum/minimum bending moment across my element? Thanks, Joe.
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2023年3月13日 GMT-4 04:39

I am not sure about your exact scenario, but I think you should look at the Section Forces feature in the Solid Mechanics interface.

-------------------
Henrik Sönnerlind
COMSOL
I am not sure about your exact scenario, but I think you should look at the *Section Forces* feature in the *Solid Mechanics* interface.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content