Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Two-phase flow
Posted 2023年8月9日 GMT-4 01:45 Porous Media Flow, Studies & Solvers Version 6.1 1 Reply
Please login with a confirmed email address before reporting spam
Good morning, I want to simulate a channel with particle solids and vapour. both phase are moving and once exiting from the bottom enter again in the channel. Any suggestions? thanks in advance for your help
Please login with a confirmed email address before reporting spam
Hello Girolama,
not sure on how you want to model your solid particles in your gas flow : depending on the density of particles, different approaches may be used and you probably need to refine your question if you want relevant feedback.
As for simulating the loop without modeling it, you may be interested in this resource :
[https://www.comsol.com/blogs/using-general-extrusion-operators-to-model-periodic-structures/]
The principle is to take the information from the outlet and reinject it at the inlet.
Good luck,
Eric Favre
Renaissance Fusion
Eric Favre
Renaissance Fusion