Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Convergence problem in very low velocity
Posted 2024年2月14日 GMT-5 23:21 3 Replies
Please login with a confirmed email address before reporting spam
HI, I am using Euler euler method to simulate multiphase flow in 2D domain. When my inlet velocity is 0.001 m/s the solver is showing the below error (attached). I have used "automatic highly non-linear (Newton)" method as non-linear solver for uc,ud,and p. But whenever im using slightly higher velocity ( say 0.002 m/s) it is converging.
Is it the problem with velocity ?
Attachments:
Please login with a confirmed email address before reporting spam
Hello Lakshmi,
The file you attached seems to be blank.
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
hi, sorry, some errror occured .I am uploading the document again. Kindly check
Attachments:
Please login with a confirmed email address before reporting spam
Hi, iam still facing with the same issues with low velocity, Can someone help?