Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Undefined material property 'murbnd' required by Transition Boundary Condition

Posted 2024年10月1日 GMT+8 23:02 3 Replies

Zahra Razavi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have problem with defining material property which I have face this error message: "Undefined material property 'murbnd' required by Transition Boundary Condition" and I uploaded my file here and I really don't know where is my problem!

Attachments:

3 Replies Last Post 2024年10月3日 GMT+8 00:03
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024年10月1日 GMT+8 23:46

You must define respective boundary material properties in the 'Materials' node. Check the error (Stop sign) in the Materials top node.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You must define respective boundary material properties in the 'Materials' node. Check the error (Stop sign) in the Materials top node. Cheers Edgar
Zahra Razavi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024年10月2日 GMT+8 22:20

You must define respective boundary material properties in the 'Materials' node. Check the error (Stop sign) in the Materials top node.

Cheers Edgar

Do you know how can I resolve this problem? cause I chose all the domains but still give me some boundaries that are not selected? it is a little complicated structure, could you help me to resolve this problem?

Thank you, Zahra

>You must define respective boundary material properties in the 'Materials' node. Check the error (Stop sign) in the Materials top node. > >Cheers >Edgar Do you know how can I resolve this problem? cause I chose all the domains but still give me some boundaries that are not selected? it is a little complicated structure, could you help me to resolve this problem? Thank you, Zahra
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024年10月3日 GMT+8 00:03

It is not about the domains. You must assign material properties to the transition boundaries. You can do that in the 'Materials' node by adding a boundary (not domain) level material. You can also set the material properties in the transition subnode in the physics.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
It is not about the domains. You must assign material properties to the transition boundaries. You can do that in the 'Materials' node by adding a boundary (not domain) level material. You can also set the material properties in the transition subnode in the physics.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content