Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

change the thickness of the contour lines

Posted 2013年7月8日 GMT-4 02:18 Parameters, Variables, & Functions, Results & Visualization Version 4.2 3 Replies

Yinjie Ding
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,

i performed a 3D simulation for a stress distribution, with stress contour lines labeled.
the thickness of the contour line is a bit too thin to see. how can i change the setting of the contour line?


cheers!
3 Replies Last Post 2014年12月4日 GMT-5 02:11
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月8日 GMT-4 02:31
This is currently not possible, neither in 4.2 nor in the latest version, 4.3b. We hope that we will be able to add support for this in a later version.
This is currently not possible, neither in 4.2 nor in the latest version, 4.3b. We hope that we will be able to add support for this in a later version.
Alicia T
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014年12月4日 GMT-5 01:17
Hi

I realized this when I tried to export the streamlines into a tiff image. I found that a better way to get good bold streamlines is to select the line type as "tube" instead of "line".

In the plot settings window for streamline, scroll down to the tab "colouring and style". In the "Line type" selection, choose "tube". For me, the following selections resulted in bold streamlines:

Tube radius expression: 0.001mm
Radius scale factor (ticked): 1

Hope this helps!

Cheers
Alicia
Hi I realized this when I tried to export the streamlines into a tiff image. I found that a better way to get good bold streamlines is to select the line type as "tube" instead of "line". In the plot settings window for streamline, scroll down to the tab "colouring and style". In the "Line type" selection, choose "tube". For me, the following selections resulted in bold streamlines: Tube radius expression: 0.001mm Radius scale factor (ticked): 1 Hope this helps! Cheers Alicia
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014年12月4日 GMT-5 02:11
I realized this when I tried to export the streamlines into a tiff image. I found that a better way to get good bold streamlines is to select the line type as "tube" instead of "line".


Being able to plot streamlines as tubes has been possible since 4.0, I think. Support for plotting contour lines as tubes was added in 5.0.
[QUOTE]I realized this when I tried to export the streamlines into a tiff image. I found that a better way to get good bold streamlines is to select the line type as "tube" instead of "line". [/QUOTE] Being able to plot streamlines as tubes has been possible since 4.0, I think. Support for plotting contour lines as tubes was added in 5.0.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content