Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using Level Set Two Phase Flow (tpf) for any Solid Material Module

Posted 2013年8月26日 GMT-4 02:01 Fluid & Heat, Structural Mechanics Version 4.2a 1 Reply

Abir Ghosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to model a two phase flow system where the phases will be Fluid and Viscoelastic (or any other Solid material) and also want to tack the interface using Level Set Two phase flow module.

can any one suggest me how to override one of the fluid phase of the level set phase by any solid material module??

Thanks
Abir
1 Reply Last Post 2015年2月11日 GMT-5 16:21
COMSOL Moderator

Hello Abir Ghosh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年2月11日 GMT-5 16:21
Dear Abir,

The Two Phase Flow interface is meant for simulating two different fluids. If you want to model a fluid and a solid interacting, then you would want to use the Fluid Solid Interaction interface. You may find this article helpful:
www.comsol.com/blogs/fluid-structure-interaction-fsi-using-comsol-multiphysics/
Dear Abir, The Two Phase Flow interface is meant for simulating two different fluids. If you want to model a fluid and a solid interacting, then you would want to use the Fluid Solid Interaction interface. You may find this article helpful: http://www.comsol.com/blogs/fluid-structure-interaction-fsi-using-comsol-multiphysics/

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content