Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
impose heat flux fluid/fluid Interfaces: laminar (tpf) and heat transfer in fluids (ht)
Posted 2013年8月29日 GMT-4 14:56 Fluid & Heat, Heat Transfer & Phase Change Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I would like to impose a heat flux on a 2D fluid/fluid interface. I have considered utilizing an equivalent volumetric generation using the delta function and even the tpf.Vfi function to turn on the source at one side of the interface. The axisymetric node makes utilizing normal vectors complicated when the geometry revolves out of the x-z plane (r-z) about z.
James
Hello James Wilson
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.