Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Periodic and symmetry boundary conditions in Structural mechanics module

Posted 2013年10月29日 GMT-4 18:47 Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 4.3b 0 Replies

Amanda Fujii
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I am new to Comsol and am trying to model a simple 2D composite unit cell (concentric circle in a square) with periodic boundary conditions. As a guide I am using a paper by Drago et al. (dx.doi.org/10.1016/j.compscitech.2006.02.031). In this paper, the symmetry of the unit cell is exploited: 1/4 of the unit cell is modeled and symmetry conditions are imposed. Additionally, periodic boundary conditions are applied.

I am not sure how to replicate this procedure since only one of the coupled edges for periodic boundary conditions is created in the model - the other is accounted for using the symmetry condition.

Thank you for your help!
Sincerely,
Amanda Fujii
0 Replies Last Post 2013年10月29日 GMT-4 18:47
COMSOL Moderator

Hello Amanda Fujii

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content