Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Applying external strain

Posted 2013年11月12日 GMT-5 06:33 Structural Mechanics Version 4.0, Version 4.0a, Version 4.1, Version 4.2, Version 4.2a, Version 4.3, Version 4.3a, Version 4.3b 5 Replies

Alberto Garcia-Cristobal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All

I am doing simulation to study elastic properties of cylindrical abject. I want to apply external strain on top surface of the cylinder. So how can COMSOL handles such cases?
Thanks
5 Replies Last Post 2013年11月13日 GMT-5 10:58
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年11月12日 GMT-5 07:10
Alberto,

it is easy: you apply a strain boundary condition to the surface.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Alberto, it is easy: you apply a strain boundary condition to the surface. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Alberto Garcia-Cristobal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年11月12日 GMT-5 18:24
Dear Edgar

Thank you for the suggestion but I couldn't get any place yo do it in comsol, i.e to select the 2D surface at the top of the cylinder and apply the required strain value.


Thanks
Dear Edgar Thank you for the suggestion but I couldn't get any place yo do it in comsol, i.e to select the 2D surface at the top of the cylinder and apply the required strain value. Thanks
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年11月13日 GMT-5 07:50
Hi,

There is nothing such as a "Strain boundary condition". It is not a mathematically well defined operation.

If you want to prescribe the strain components tangential to the boundary (which are the only ones that could be prescribed), this can be done using a Prescribed Displacement, where the expressions for the displacements are such that you can retrieve the strains from their derivatives.

Prescribing the individual strain components (even within the plane) is not a well defined operation, since that could violate the compatibility requirement.

Regards,
Henrik
Hi, There is nothing such as a "Strain boundary condition". It is not a mathematically well defined operation. If you want to prescribe the strain components tangential to the boundary (which are the only ones that could be prescribed), this can be done using a Prescribed Displacement, where the expressions for the displacements are such that you can retrieve the strains from their derivatives. Prescribing the individual strain components (even within the plane) is not a well defined operation, since that could violate the compatibility requirement. Regards, Henrik
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年11月13日 GMT-5 09:39

Henrik is right of course: it is prescribed displacement you can apply. I was a little sloppy in my response.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Henrik is right of course: it is prescribed displacement you can apply. I was a little sloppy in my response. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Alberto Garcia-Cristobal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年11月13日 GMT-5 10:58
Thanks all, I got it.
Thanks all, I got it.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content