Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Need help in output acoustic pressure in air domain
Posted 2013年12月11日 GMT-5 22:40 Acoustics & Vibrations Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,everyone
I used Pressure acoustic, frequency domain and electromechanics Physics, 2D-axisymmetric to simulate a vibration membrane to get the output pressure in the water domain. The result is good. But when I changed the water domain into air domain, the shape of the output pressure line is very strange, the line is very flat at the beginning, but change very sharp unexpected.
The x-coordinate is frequency. I don't know why.could anyone can give me some advises please? Thank you in advanced!
I used Pressure acoustic, frequency domain and electromechanics Physics, 2D-axisymmetric to simulate a vibration membrane to get the output pressure in the water domain. The result is good. But when I changed the water domain into air domain, the shape of the output pressure line is very strange, the line is very flat at the beginning, but change very sharp unexpected.
The x-coordinate is frequency. I don't know why.could anyone can give me some advises please? Thank you in advanced!
1 Reply Last Post 2013年12月16日 GMT-5 04:54
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Could you post figures displaying the output as a function of frequency? Or post the model file?
--
/RVN
--
/RVN