Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

DC Discharge and Magnetic Field

Posted 2014年2月28日 GMT-5 14:06 Low-Frequency Electromagnetics, Plasma Physics Version 4.2 3 Replies

Dmitry Ratushny
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello!

I try to get Current-Voltage Characteristic of Inverted Magnetron Vacuum Gauge using COMSOL.

(see image here ej.iop.org/images/0963-0252/21/3/035006/Full/psst402568f02_online.jpg )

I successfully modeled a coaxial DC glow discharge, but don't understand, how add axial magnetic field.

I have read this post www.comsol.com/community/forums/plasma-module/thread/26073/ , is it really impossible to modele my system?
3 Replies Last Post 2014年3月3日 GMT-5 10:16
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月28日 GMT-5 14:32

Dmitry,

the thread you are referring to was discussing the magnetron sputtering process. I think that is an animal different from what you have in mind.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Dmitry, the thread you are referring to was discussing the magnetron sputtering process. I think that is an animal different from what you have in mind. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Dmitry Ratushny
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年2月28日 GMT-5 14:51
Of course I don't interest in sputtering process, I just want to get some information about plasma in crossed Electric and Magnetic fields ( coaxial diode with axial magnetic field )

I get some Ion-Current information for coaxial diode discharge without magnetic field (attach images).
Of course I don't interest in sputtering process, I just want to get some information about plasma in crossed Electric and Magnetic fields ( coaxial diode with axial magnetic field ) I get some Ion-Current information for coaxial diode discharge without magnetic field (attach images).
Luke Gritter Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月3日 GMT-5 10:16
Dmitry,

As long as your plasma is sufficiently collisional, you can model this process in COMSOL. On the settings for the DC Discharge interface, activate "Compute tensor ion transport properties" and "Compute tensor electron transport properties". You can then enter the magnetic flux density in the Model Inputs section of the settings for the Plasma Model node.

--
Luke Gritter
AltaSim Technologies
Dmitry, As long as your plasma is sufficiently collisional, you can model this process in COMSOL. On the settings for the DC Discharge interface, activate "Compute tensor ion transport properties" and "Compute tensor electron transport properties". You can then enter the magnetic flux density in the Model Inputs section of the settings for the Plasma Model node. -- Luke Gritter AltaSim Technologies

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content