Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Help needed with Coefficient of variation calculation in comsol

Posted 2014年3月14日 GMT-4 12:15 Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics Version 4.3a 0 Replies

Houari Cobas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, I need help with a project I'm working on. I have microfluidic mixer and I would like to evaluate its mixing quality. In order to visualize what is happening inside the mixer I had used the particle tracing module.
I had read that the mixing quality can be evaluated taking into account the coefficient of variation (CoV) of particles at the mixer output.
CoV can be calculated as the standard deviation divided by the mean value.
The problem is that I don´t find or know how to do this in Comsol.

Can you help telling me how to do this or perhaps giving me an idea about another method to evaluate the mixer quality?

Thank you very much in advance.
0 Replies Last Post 2014年3月14日 GMT-4 12:15
COMSOL Moderator

Hello Houari Cobas

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content