Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Using a final result of a model as an intial domain condition for another model
Posted 2009年8月12日 GMT-4 17:44 2 Replies
Please login with a confirmed email address before reporting spam
HI. I am currently modeling a normalizing process in COMSOL 2D after a carburizing process. I would like to know is there a way to save a final result (concentration profile) of the carbruizing model and use it as an initial condition for the normalizing step(without writing the condition as a math function).
Thank you for your help.
Thank you for your help.
2 Replies Last Post 2013年5月12日 GMT-4 01:07
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Hi
I'll propose that you take a look at the "Solver Manager" menu and cross check in the documentations, there you have possibilities to solve for one geometry, or application, store the results and restart for anoter geometry or application, with the previously saved values
take some time to run a few of the demos/examples and to read a couple of times the doc, that helps
Good luck
Ivar
I'll propose that you take a look at the "Solver Manager" menu and cross check in the documentations, there you have possibilities to solve for one geometry, or application, store the results and restart for anoter geometry or application, with the previously saved values
take some time to run a few of the demos/examples and to read a couple of times the doc, that helps
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Dear sir,
I am keenly interested to learn normalizing and carburizing (heat treatment) by COMSOL software.
please help me
Thanking you
I am keenly interested to learn normalizing and carburizing (heat treatment) by COMSOL software.
please help me
Thanking you