Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to apply a constant rate of displacement loading for cantilever bending

Please login with a confirmed email address before reporting spam

I want to model the bending process of a cantilever. I build a 2D plain-strain model, with a rectangular for the cantilever and a half circle for the tip. A contact pair is created between the tip and cantilever.

1) First I try a prescribed displacement boundary condition for the tip, and the resulting deflection of cantilever is very close to theoretical beam bending theory.

Then I get stuck on the constant rate of displacement boundary condition. I change the model to transient analysis, and put h0*t in the prescribed displacement, where h0 is the rate of displacement. The results shows the cantilever bends but the tip remains in the original position. This seems not right. Any suggestion to solve this prob?

2) the material of cantilever is a soft polymer, while the tip is diamond. Thus I want to model the tip as a rigid body, while the cantilever can be deformed. When I model the cantilever as rigid, it indeed bends but there is a very large stress near the contact point. If I want to see the localized deformation at the contact point, do I need the moving mesh model instead?

Thanks for all your helps.

Ping

1 Reply Last Post 2009年11月28日 GMT-5 21:50
COMSOL Moderator

Hello Ping Du

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2009年11月28日 GMT-5 21:50
Have you solved your problem?
The contact paris is only for mechanical model?
Have you solved your problem? The contact paris is only for mechanical model?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.