Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

is there any autosave feature in comsol?

Posted 2010年4月27日 GMT+8 17:22 Version 4.1, Version 5.0, Version 5.1 8 Replies

Dhiraj Kumar Garg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i am facing problem when my simulations in comsol got terminated abruptly due to server failure or windows. all the results/ calculations upto that point are gone. so i have to restart the simulations again. is there any auto-save feature in comsol so that the results are auto saved after every fixed number of iterations or fixed time so that next time i can start with last save instead from the beginning? is yes, how to do so?

is there anybody who knows that?

thanks in advance.
8 Replies Last Post 2016年6月7日 GMT+8 19:46
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010年4月27日 GMT+8 20:07
Hi try a search on the forum,

there are a few ways, in the advaned features (depends on solvers and modes, and as extreme a "dummy" parametric sweep that saves the sequency of simulations

Ivar
Hi try a search on the forum, there are a few ways, in the advaned features (depends on solvers and modes, and as extreme a "dummy" parametric sweep that saves the sequency of simulations Ivar
Raylene Moreno
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010年9月10日 GMT+8 03:10
I didn't find anything in the forum. Did anyone figure out a way to autosave files while solving to avoid losing everything when there is some kind of computer/server problem?
4.0a
I didn't find anything in the forum. Did anyone figure out a way to autosave files while solving to avoid losing everything when there is some kind of computer/server problem? 4.0a
Osameh Ghazian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月1日 GMT+8 03:03
Is there any Autosave in comsol ???????
Is there any Autosave in comsol ???????
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月1日 GMT+8 15:58
Hi,

In version 4.1 there is a recovery option that autosaves solutions during the solver stage so that you can recover the last completed solver step and resume the simulation if something happens during a long run. Select the "Save recovery file" check box in the Preferences dialog box, which you open from the Options menu. To open an autosaved file, choose Open Recovery File from the File menu.

Best regards,
Magnus Ringh, COMSOL
Hi, In version 4.1 there is a recovery option that autosaves solutions during the solver stage so that you can recover the last completed solver step and resume the simulation if something happens during a long run. Select the "Save recovery file" check box in the Preferences dialog box, which you open from the Options menu. To open an autosaved file, choose Open Recovery File from the File menu. Best regards, Magnus Ringh, COMSOL
Salma Gmati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月1日 GMT+8 16:11
the size of the file is so big that i couldn't send it ! can i give you the PDF file to show you the model :)

thanks

salma

the size of the file is so big that i couldn't send it ! can i give you the PDF file to show you the model :) thanks salma
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月1日 GMT+8 18:00
Hi

You can clear (not delete !) th solution, the mesh, and reset the project see the "File" menu, this will make the file far smaller and easier to upload, we useres here "just" have to resolve it ;)

--
Good luck
Ivar
Hi You can clear (not delete !) th solution, the mesh, and reset the project see the "File" menu, this will make the file far smaller and easier to upload, we useres here "just" have to resolve it ;) -- Good luck Ivar
Salma Gmati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月1日 GMT+8 20:49
hi ,
thanks a lot :)
I show you the second structure (half sphere of thickness 0.2 meter), it has a size smaller than the first ,in this case insulation is straw.I chose the same boundary conditions and the same initial condition but the influence of the straw is neglected straw so i must take into account heat transfer modes in this structure (conduction, convection) and the effect of moisture in the for déstrubition for the temperature inside the structure :))


salma
hi , thanks a lot :) I show you the second structure (half sphere of thickness 0.2 meter), it has a size smaller than the first ,in this case insulation is straw.I chose the same boundary conditions and the same initial condition but the influence of the straw is neglected straw so i must take into account heat transfer modes in this structure (conduction, convection) and the effect of moisture in the for déstrubition for the temperature inside the structure :)) salma
Alexander Pismenskiy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年6月7日 GMT+8 19:46
Dear, Magnus Ringh,
unfortunally this option doesn't work in vervions 5.x: Results are empty, no Resume command for the Study...
Dear, Magnus Ringh, unfortunally this option doesn't work in vervions 5.x: Results are empty, no Resume command for the Study...

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content